TS29100/1/2
1.0A Ultra Low Dropout Positive Voltage Regulator
Low Dropout Voltage 0.4V typ. Enable Input Control Adjusta...
TS29100/1/2
1.0A Ultra Low Dropout Positive
Voltage Regulator
Low Dropout
Voltage 0.4V typ. Enable Input Control Adjustable Output Error Flag Detection
General Description
The TS29100/1/2 series are using process with a PNP pass element for high current, high accuracy and low dropout
voltage regulators. These regulator s feature 400mV(typ) dropout
voltages and very low ground current, these devices also find applications in lower current and low dropout critical systems, where their tiny dropout
voltage and ground current values are important attributes. The TS29100/1/2 series are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, positive and negative transient
voltage spikes, logic level enable control and error flag which signals whenever the output falls out of regulation. On the TS29101 and TS29102, the enable pin may be tied to Vin if it is not required for enable control. This series are offered in 3-pin SOT-223 and 8-pin SOP pacakge.
Features
Dropout
voltage typically 0.4V @Io=1.0A Output current up to 1.0A Low ground current Output
voltage trimmed before assembly Extremely fast transient response +60V Transient peak
voltage -20V Reverse peak
voltage Zero current shutdown mode Error flag signals output out of regulation Internal current limit Thermal shutdown protection
Ordering Information
Part No.
TS29100CWxx TS29101CSxx TS29102CSxx TS29102CS Note: Where xx denotes
voltage option, available a...