Photocouplers Infrared LED & Photo Triac
TLP268J
TLP268J
1. Applications
• Triac Drivers • Programmable Logic Controll...
Photocouplers Infrared LED & Photo Triac
TLP268J
TLP268J
1. Applications
Triac Drivers Programmable Logic Controllers (PLCs) AC-Output Modules Solid-State Relays
2. General
The TLP268J consists of a zero crossing photo triac, optically coupled to an infrared LED. The TLP268J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance of 5.0 mm (min) and insulation thickness of 0.4 mm (min). Therefore, the TLP268J meets the reinforced insulation class requirements of international safety standards.
3. Features
(1) Peak off-state
voltage: 600 V (min) (2) Zero crossing functionary (ZC) (3) Trigger LED current: 3 mA (max) (4) On-state current: 70 mA (max) (5) Isolation
voltage: 3750 Vrms (min) (6) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory
Note 1: When a VDE approved type is needed, please designate the Option (V4).
Table Trigger LED Current (Note) (Unless otherwise specified, Ta = 25 )
Rank
IFT Rank Marking
Test Condition
Trigger LED Current IFT Trigger LED Current IFT
(min)
(max)
Unit
None (IFT2)
3
VT = 3 V
2
VT = 3 V
3
mA
2
Note:
Specify both the part number and a rank in this format when ordering. Example: TLP268J (IFT2) For safety standard certification, however, specify the part number alone. Example: TLP268J
©2016-2020 Toshiba E...