TLP266J

Photocouplers Infrared LED & Photo Triac TLP266J TLP266J 1. Applications Triac Drivers Programmable Logic Controllers (PLCs) AC-Output Modules Solid-State Relays 2. General The TLP266J consists of a zero crossing photo triac, optically coupled to an infrared LED. The TLP266J is housed in the SO6 package and guarantees a creepage distance of 5.0 mm (min), a clearance of 5.0 mm (min) and insulation thickness of 0.4 mm (min). Therefore, the TLP266J meets the reinforced insulation class requirements of international safety standards. 3. Features (1) Peak off-state voltage: 600 V (min) (2) Zero crossing functionary (ZC) (3) Trigger LED current: 10 mA (max) (4) On-state current: 70 mA (max) (5) Isolation voltage: 3750 Vrms (min) (6) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan and Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (V4). Table Trigger LED Current (Note) (Unless otherwise specified, Ta = 25 ) Rank IFT Rank Marking Test Condition Trigger LED Current IFT Trigger LED Current IFT (min) (max) Unit None (IFT7) 10 VT = 3 V 7 VT = 3 V  10 mA  7 Note: Specify both the part number and a rank in this format when ordering. Example: TLP266J (IFT7) For safety standard certification, however, specify the part number alone. Example: TLP266J ©2017-2...