TLGE125

TLGE125 TENTATIVE TOSHIBA LED Lamp InGaAℓP Green Light Emission TLGE125 Panel Circuit Indicator Unit in mm · · · · · · · · · 3mm diameter (T1) InGaAℓP green LED All plastic mold type. Colorless clear lens Low drive current, high intensity green light emission Recommended forward current: IF = 15~20mA (DC) All plastic molded lens, provides an excellent on−off contrast ratio. Fast response time, capable of pulse operation. High power luminous intensity Applications: Suitable for outdoor message signboard, safety equipment, etc. www.DataSheet4U.com Maximum Ratings (Ta = 25°C) Characteristic Forward current (DC) Reverse voltage Power dissipation Operating temperature range Storage temperature range Symbol IF VR PD Topr Tstg Rating 50 4 140 -30~85 -40~120 Unit mA V mW °C °C JEDEC EIAJ TOSHIBA Weight: 0.14g ― ― 4−4E1A 1 2002-09-25 TLGE125 Electrical And Optical Characteristics (Ta = 25°C) Characteristic Forward voltage Reverse current Luminous intensity Peak emission wavelength Spectral line half width Dominant wavelength Symbol VF IR IV λp ∆λ λd IF=20mA VR=4V IF=20mA IF=20mA IF=20mA IF=20mA (Note) Test Condition Min ― ― 153 ― ― ― Typ. 2.27 ― 500 574 11 571 Max 2.8 50 ― ― ― ― Unit V µA mcd nm nm nm (Note): Lamps are classified into the following ranks according to their luminous intensity. Measurement tolerance for each limit is ±15%. www.DataSheet4U.com P: 180-360mcd, Q: 320-640mcd, R: 560-1120mcd Precaution · · · Please be careful of the followings Soldering tempera...