DatasheetsPDF.com

TJA1020 Datasheet

Part Number TJA1020
Manufacturers NXP
Logo NXP
Description LIN transceiver
Datasheet TJA1020 DatasheetTJA1020 Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TJA1020 LIN transceiver Product specification Supersedes data of 2001 Dec 17 2002 Jul 17 Philips Semiconductors Product specification LIN transceiver FEATURES General • Baud rate up to 20 Kbaud • Very low ElectroMagnetic Emission (EME) • High ElectroMagnetic Immunity (EMI) • Low slope mode for an even further reduction of EME • Passive behaviour in unpowered state • Input levels compatible with 3.3 and 5 V devices • Integrated termination resistor for Local Inte.

  TJA1020   TJA1020






Part Number TJA1029
Manufacturers NXP
Logo NXP
Description LIN 2.2A/SAE J2602 transceiver
Datasheet TJA1020 DatasheetTJA1029 Datasheet (PDF)

TJA1029 LIN 2.2A/SAE J2602 transceiver with TXD dominant timeout Rev. 2 — 24 April 2013 Product data sheet 1. General description The TJA1029 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle subnetworks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1029 is pin-compatible with the TJA1020, TJA1021, TJA1022 .

  TJA1020   TJA1020







Part Number TJA1028
Manufacturers NXP Semiconductors
Logo NXP Semiconductors
Description LIN transceiver
Datasheet TJA1020 DatasheetTJA1028 Datasheet (PDF)

TJA1028 LIN transceiver with integrated voltage regulator Rev. 5 — 30 January 2023 Product data sheet 1 General description The TJA1028 is a LIN 2.0/2.1/SAE J2602 and ISO 17987-4:2016 (12 V) compliant transceiver with an integrated low-drop voltage regulator. The voltage regulator can deliver up to 70 mA and is available in 3.3 V and 5.0 V variants. TJA1028 facilitates the development of compact nodes in Local Interconnect Network (LIN) bus systems. To support robust designs, the TJA1028 off.

  TJA1020   TJA1020







Part Number TJA1027
Manufacturers NXP
Logo NXP
Description LIN 2.2A/SAE J2602 transceiver
Datasheet TJA1020 DatasheetTJA1027 Datasheet (PDF)

TJA1027 ISO 17987/LIN 2.x/SAE J2602 transceiver Rev. 3 — 18 December 2018 Product data sheet 1. General description The TJA1027 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle sub-networks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 and ISO 17987-4:2016 (12 V). The TJA1027 is pin-compatible with the TJA1020, TJA1021.

  TJA1020   TJA1020







Part Number TJA1024
Manufacturers NXP
Logo NXP
Description Quad LIN 2.2A/SAE J2602 transceiver
Datasheet TJA1020 DatasheetTJA1024 Datasheet (PDF)

TJA1024 Quad LIN 2.2A/SAE J2602 transceiver Rev. 1 — 12 February 2015 Product data sheet 1. General description The TJA1024 is a quad LIN transceiver that provides the interface between a Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It comprises two independent and separated dual LIN transceiver blocks on a single die (only the ground pins GND1 and GND2 are connected internally) with dedicated supply pins (VBAT1 for LIN 1/LIN2 and VBA.

  TJA1020   TJA1020







Part Number TJA1022
Manufacturers NXP
Logo NXP
Description Dual LIN 2.2A/SAE J2602 transceiver
Datasheet TJA1020 DatasheetTJA1022 Datasheet (PDF)

TJA1022 Dual LIN 2.2A/SAE J2602 transceiver Rev. 3 — 24 May 2018 Product data sheet 1. General description The TJA1022 is a dual LIN transceiver that provides the interface between a Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle subnetworks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, ISO 17987-4:2016 (12 V LIN) and SAE J2602. The TJA1022T and TJA1022TK.

  TJA1020   TJA1020







LIN transceiver

INTEGRATED CIRCUITS DATA SHEET TJA1020 LIN transceiver Product specification Supersedes data of 2001 Dec 17 2002 Jul 17 Philips Semiconductors Product specification LIN transceiver FEATURES General • Baud rate up to 20 Kbaud • Very low ElectroMagnetic Emission (EME) • High ElectroMagnetic Immunity (EMI) • Low slope mode for an even further reduction of EME • Passive behaviour in unpowered state • Input levels compatible with 3.3 and 5 V devices • Integrated termination resistor for Local Interconnect Network (LIN) slave applications • Wake-up source recognition (local or remote). Low power management • Very low current consumption in sleep mode with local and remote wake-up. Protections • Transmit data (TXD) dominant time-out function • Bus terminal and battery pin protected against transients in the automotive environment (ISO7637) • Bus terminal short-circuit proof to battery and ground • Thermally protected. QUICK REFERENCE DATA SYMBOL VBAT IBAT supply voltage on pin BAT supply current on pin BAT in sleep mode supply current on pin BAT in standby mode; bus recessive supply current on pin BAT in normal slope mode; bus recessive supply current on pin BAT in normal slope mode; bus dominant VLIN Tvj Vesd(HBM) DC voltage on pin LIN virtual junction temperature electrostatic discharge voltage; human body model; pins NWAKE, LIN and BAT PARAMETER MIN. 5 1 100 100 1 −27 −40 −4 TYP. 12 3 400 400 3.5 − − − GENERAL DESCRIPTION TJA1020 The TJA1020 is the interface between the LIN .


2005-04-16 : LA5603    MLED930    M38198    BU2527A    F4500    ES07D    FDI047AN08A0    FMMT2484    FQP90N10V2    FQPF90N10V2   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)