TFS220E

tfs220E.doc version 1.0 01.07.99 ______________________________________________________________________________________________________ VI TELEFILTER Measurement Condition Ambient Temperature: Input Power Level: Source impedance: Load impedance: Terminating impedances: input: output: Filter specification 23 °C 0 dBm 50 Ω single ended 50 Ω single ended T.B.D T.B.D TFS 220 E 1/4 ______________________________________________________________________________________________________ Construction, pin connection and 50 Ω test circuit see page 2 Stability characteristics and packing see page 3 Air reflow temperature conditions see page 4 Characteristics Remark: Reference level for the relative attenuation arel is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The nominal frequency fN is fixed to 220,38 MHz. The given values for the relative attenuation arel and for the phase ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo. Data typ. Value Limit ______________________________________________________________________________________________________ Insertion Loss 6.2 dB max. 10 dB ae = amin (Reference level) ____________________________________________________________________________________...