TCAN1051-Q1

Product Folder Order Now Technical Documents Tools & Software Support & Community TCAN1051-Q1, TCAN1051V-Q1, TCAN1051H-Q1 TCAN1051HV-Q1, TCAN1051G-Q1, TCAN1051GV-Q1 TCAN1051HG-Q1, TCAN1051HGV-Q1 SLLSET0C – OCTOBER 2016 – REVISED MAY 2017 TCAN1051-Q1 Automotive Fault Protected CAN Transceiver with CAN FD 1 Features 1 AEC Q100: Qualified for Automotive Applications – Device Temperature Grade 1: -40°C to 125°C Ambient Operating Temperature – Device HBM Classification Level: ±16 kV – Device CDM Classification Level ±1500 V Meets the ISO 11898-2:2016 and ISO 11898-5:2007 Physical Layer Standards 'Turbo' CAN: – All Devices Support Classic CAN and 2 Mbps CAN FD (Flexible Data Rate) and "G" Options Support 5 Mbps – Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin – Higher Data Rates in Loaded CAN Networks I/O Voltage Range Supports 3.3 V and 5 V MCUs Ideal Passive Behavior When Unpowered – Bus and Logic Terminals are High Impedance (no load) – Power Up/Down With Glitch Free Operation On Bus and RXD Output Protection Features – IEC ESD Protection up to ±15 kV – Bus Fault Protection: ±58 V (non-H variants) and ±70 V (H variants) – Undervoltage Protection on VCC and VIO (V variants only) Supply Terminals – Driver Dominant Time Out (TXD DTO) - Data rates down to 10 kbps – Thermal Shutdown Protection (TSD) Receiver Common Mode Input Voltage: ±30 V Typical Loop Delay: 110 ns Junction Temperatures from –55°C to 150°C Ava...