SY89296U
2.5V/3.3V 1.5GHz Precision LVPECL Programmable Delay
with Fine Tune Control
Precision Edge®
General Descriptio...
SY89296U
2.5V/3.3V 1.5GHz Precision LVPECL Programmable Delay
with Fine Tune Control
Precision Edge®
General Description
The SY89296U is a programmable delay line that delays the input signal using a digital control signal. The delay can vary from 3.2ns to 14.8ns in 10ps increments. Further, the delay may be varied continuously in about 40ps range by setting the
voltage at the FTUNE pin. In addition, the input signal is LVPECL, uses either a 2.5V ±5% or 3.3V ±10% power supply, and is guaranteed over the full industrial temperature range (–40°C to +85°C).
The delay varies in discrete steps based on a control word. The control word is 10-bits long and controls the delay in 10ps increments. The eleventh bit is D[10] and is used to simultaneously cascade the SY89296U for a larger delay range. In addition, the input pins IN and /IN default to an equivalent low state when left floating. Further, for maximum flexibility, the control register interface accepts
CMOS or TTL level signals.
For applications that do not require an analog delay input, see the SY89295U. The SY89295U and SY89296U are part of Micrel’s high-speed, Precision Edge® product line.
Data sheets and support documentation can be found on Micrel’s web site at: www.micrel.com.
Features
Precision Edge®
Precision LVPECL programmable delay time
Guaranteed AC performance over temperature and
voltage:
− >1.5GHz fMAX − <160ps rise/fall times
Low jitter design:
− <10psPP total jitter − <2psRMS cycle-to-cycle jitter −...