SINGLE SUPPLY QUAD PECL-TO-TTL W/LATCHED OUTPUT ENABLE
Micrel, Inc.
NOT RECOMMENDED FOR NEW DESIGNS
SINGLE SUPPLY QUAD PECL-TO-TTL W/LATCHED OUTPUT ENABLE
Precision Edge®
Pr...
Description
Micrel, Inc.
NOT RECOMMENDED FOR NEW DESIGNS
SINGLE SUPPLY QUAD PECL-TO-TTL W/LATCHED OUTPUT ENABLE
Precision Edge®
Precision SESYdY110g00eHH®884411 SY10H841
SY100H841
FEATURES
s Translates positive ECL to TTL (PECL-to-TTL) s 300ps pin-to-pin skew s 500ps part-to-part skew s Differential internal design for increased noise
immunity and stable threshold inputs s VBB reference output s Single supply s Enable input s Latch enable input s Extra TTL and ECL power/ground pins to reduce
cross-talk/noise s High drive capability: 24mA each output s Fully compatible with industry standard 10K, 100K
I/O levels s Available in 16-pin SOIC package
BLOCK DIAGRAM
Precision Edge®
DESCRIPTION
The SY10/100H841 are single supply, low skew translating 1:4 clock drivers.
The devices feature a 24mA TTL output stage, with AC performance specified into a 50pF load capacitance.
A latch is provided on-chip. When LEN is LOW (or left open, in which case it is pulled low by the internal pulldowns) the latch is transparent. A HIGH on the enable pin (EN) forces all outputs LOW.
As frequencies increase to 40MHz and above, precise timing and shaping of clock signals becomes extremely important. The H841 solves several clock distribution problems such as minimizing skew (300ps), maximizing clock fanout (24mA drive), and precise duty cycle control through a proprietary differential internal design.
The 10K version is compatible with 10KH ECL logic levels. The 100K version is compatible with 100K levels.
VB...
Similar Datasheet