SYNCHRONOUS EQUIPMENT CLOCK/SYNCHRONIZER - SY02-PLL2
SY02-PLL2
Date: December 12, 2003
•
INTRODUCTION
The SY02-PLL2...
SYNCHRONOUS EQUIPMENT CLOCK/SYNCHRONIZER - SY02-PLL2
SY02-PLL2
Date: December 12, 2003
INTRODUCTION
The SY02-PLL2 is a crystal-based PLL synchronizer designed as a module level subsystem for easy incorporation into telecommunication equipment.
-
FEATURES
Low jitter output from intrinsically low jitter VCXO; Two references inputs, user selects the frequencies; Alarms and status; Buffered reference output; Tri-state (high impedance) reference and oscillators outputs; Provides free running clock output of ±20ppm; The unit changes timing modes in response to external events; J-TAG service port for re-programming and servicing;
-
APPLICATIONS
Line Cards ATM SDH PDH SONET Other telecommunication equipment.
RALTRON ELECTRONICS CORP. ! 10651 N.W.19 St ! Florida 33172 ! U.S.A. Tel: 305 593-6033 ! Fax: 305-594-3973 ! e-mail:
[email protected] ! Internet: http://www.raltron.com
th
SYNCHRONOUS EQUIPMENT CLOCK/SYNCHRONIZER - SY02-PLL2
FRS
ALARM
REF OUT CNT FREE-RUN
REFA REFB
MUX, FPD, Counters & Logic
LOOP FILTER
OUT
VCXO
J-TAG PORT
EN OUT
DESCRIPTION
The SY02-PLL2 is a Phase Lock Loop has been designed as a module level subsystem for easy incorporation into telecommunication equipment. The module generates the output from a low jitter VCXO and provides recovered signal as secondary output. The SY02-PLL2 has two reference inputs with frequencies that can be selected by user from 8 to 77.76MHz. The input reference selection pin (CNT) selects which reference...