ST8016S

ST8016S COM/SEG LCD Driver Datasheet Version 0.24 2009/10/01 Note: This is not a final specification. Some parameters are subject to change. www.DataSheet4U.com ST8016S 1. FEATURES Number of LCD drive outputs: 160 Supply voltage for LCD drive: +15.0 to +30.0 V Supply voltage for the logic system: +2.5 to +5.5 V Low power consumption Low output impedance (Segment mode) Shift clock frequency - 20 MHz (MAX.): VDD = +5.0 ± 0.5 V - 15 MHz (MAX.): VDD = +3.0 to + 4.5 V - 12 MHz (MAX.): VDD = +2.5 to + 3.0 V Adopts a data bus system 4-bit/8-bit parallel input modes are selectable with a mode (MD) pin Automatic transfer function of an enable signal Automatic counting function which, in the chip selection mode, causes the internal clock to be stopped by automatically counting 160 bits of input data Line latch circuits are reset when /DISPOFF active (Common mode) Shift clock frequency: 4 MHz (MAX.) Built-in 160-bit bi-directional shift register (divisible into 80 bits x 2) Available in a single mode (160-bit shift register) or in a dual mode (80-bit shift register x 2) Y1->Y160 Single mode Y160->Y1 Single mode Y1->Y80, Y81->Y160 Dual mode Y160->Y81, Y80->Y1 Dual mode The above 4 shift directions are pin-selectable Shift register circuits are reset when /DISPOFF active 2. DESCRIPTION The ST8016S is a 160-output segment/common driver IC suitable for driving large/medium scale dot matrix LCD panels, and is used in personal computers/work stations. The ST8016S is good both as a seg...