SPF MIT3 02
SPF MIT3 02
Plastic Fiber Optic Transmitter including Bigfoot™ IC for MOST®
Preliminary Data Sheet
Safety ...
SPF MIT3 02
SPF MIT3 02
Plastic Fiber Optic Transmitter including Bigfoot™ IC for MOST®
Preliminary Data Sheet
Safety Hints: Applications of new chip technologies leads to increasing optical efficiency and growing and higher levels of optical performance. We therefore recommend that the current versions of the IEC 825-1 and EN 60825-1 standards are taken into account right from the outset, i.e. at the equipment development stage, and that suitable protection facilities are provided. The data sheet of the 4-pin MOST Optical Transmitter (MIT3 02) has to be taken as preliminary. Samples which are delivered before the qualification and the production release are engineering samples.
Features
Description
The MOST BigfootTx Plastic Fiber Optic Transmitter Excellent solution for converting high speed data from TTL to Plastic Optical Fiber is a highly integrated
CMOS IC combined with a High speed LED designed to transmit up to 25Mbit/sec (POF) optical data which is biphase coded at up to 50Mbaud. High speed transmitter up to 50 Mbaud The internal peaking circuit minimizes PWD. TTL Data Input (Logic to Light Function) The current through the LED will be setup by an 650 nm for working in a low attenuation external resistor connected to VCC. This makes it range of PMMA Fiber High coupled power in1000 micron plastic possible to control the optical output power of the LED. fiber Low cost
Applications
Optical Transmitter for MOST Systems
02 MOSTMIT3 BigfootTx
¥4: Control...