®
SP782/784 Programmable Charge Pump
s +5V Only Low Power Voltage Conversion s Programmable Between ±5V or ±10V s Low ...
®
SP782/784 Programmable Charge Pump
s +5V Only Low Power
Voltage Conversion s Programmable Between ±5V or ±10V s Low Power Shutdown Mode Applications s RS-232/RS-423 transceiver power supplies s LCD BIAS Generator s OP-Amp Power Supplies DESCRIPTION... The SP782 and SP784 are monolithic programmable
voltage converters that produce a positive and negative
voltage from a single supply. The SP782 and SP784 are programmable such that the charge pump outputs either a ±10V
voltage or a ±5V
voltage by control of two pins. Both products require four (4) charge pump
capacitors to support the resulting output
voltages. The charge pump architecture (U.S. 5,760,637) is fabricated using a low power Bi
CMOS process technology. The SP782 and SP784 charge pumps can be powered from a single +5V supply. The low power consumption makes these charge pumps ideal for battery operated equipment. Both offer a shutdown feature that saves battery life. A system can essentially have four (4) different supply
voltages from a single battery. Typical applications are handheld instruments, notebook and laptop computers, and data acquisition systems.
+5V
10µF
+
+5V
13 14 C1+ C1– C2+ (b) C2+ (a) C2– D0 D1 LATCH SD GND 16 4
VCC
10µF
10µF
+
10µF
1µF
1 12 5
6 14 1µF 1 12 5 1µF 3 LATCH C1+ C1– C2+ C2+ C2– GND 16 4
13
15
VDD
11
VCC
SD VDD
11
10µF
3
SP784
SP782
VSS
D0 9 D1 8 2 1µF
9 8 6 15
VSS
2 10µF
SP782/SP784 DS/08
SP782/784 Programmable Charge Pump
© Copyright 2000 Sipex Corporation
...