SMDJ64 Datasheet
Part Number |
SMDJ64 |
Manufacturers |
MERITEK |
Logo |
|
Description |
Transient Voltage Suppressors |
Datasheet |
SMDJ64 Datasheet (PDF) |
Transient Voltage Suppressors DO-214AB/SMC Package
SMDJ Series
FEATURE
Breakdown Voltage from 5.0 to 440V 3000W peak pulse power capability with a 10/1000μs waveform,
repetitive rate (duty cycle): 0.01% Glass passivated chip Excellent clamping capability, fast response time. Low incremental surge resistance, Low profile package Terminal: Solderable per MIL-STD-750, Method 2026 Epoxy: UL 94V-0 rate flame retardant UL/cUL safety approved: certification No: E223045
ELECTRICAL CHARACTERISTICS
Parameter
Symbols
Value
Peak power dissipation with a 10/1000µs waveform(1)
PPP 3000
Peak pulse current with a 10/1000μs waveform(1)
IPP See Next Table
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-wave unidirectional only. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Maximum instantaneous forward voltage at 25 A for unidirectional o.
Part Number |
SMDJ64 |
Manufacturers |
JFDsemi |
Logo |
|
Description |
Glass Passivated TVS |
Datasheet |
SMDJ64 Datasheet (PDF) |
TVS: SMDJ5.0 thru SMDJ190CA
Glass Passivated TVS
Features
● For surface mounted applications in order to optimize board space
● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 3000 W peak pulse power capability
with a 10/1000 µs waveform ● Component in accordance to
RoHS 2002/95/1 and WEEE 2002/96/EC
Mechanical Date
● Case: JEDEC DO-214AB molded plastic body over glass passivated chip
● Terminals: Solder plated, solderable per MIL-STD-750 Method 2026
● Polarity: For uni-directional types the band by laser denotes the cathode, which is positive with respect to the anode under normal TVS .
Part Number |
SMDJ64 |
Manufacturers |
Prisemi |
Logo |
|
Description |
Surface Mount-3000W Transient Voltage Suppression Diodes |
Datasheet |
SMDJ64 Datasheet (PDF) |
SMDJ Series Surface Mount-3000W Transient Voltage Suppression Diodes
Description
The SMDJ Series are designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Unidirectional
Bidirectional
Feature
Applications
For surface mounted application to optimize board space Low profile package Built-in strain relief Typical maximum temperature coefficient
TVS device are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer industrial and consumer electronic application
ᇞVBR=0.1%×VBR@25℃×ᇞT
Glass passivated chip junction
3000W peak pulse powe.
Part Number |
SMDJ64 |
Manufacturers |
GW |
Logo |
|
Description |
3000 Watt Surface Mount TVS |
Datasheet |
SMDJ64 Datasheet (PDF) |
SMDJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
VOLTAGE RANGE
FEATURES
* For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than
1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V
5.0 to 440 Volts 3000 Watts Peak Power
DO-214AB
.124(3.15) .108(2.75)
.245(6.22) .220(5.59)
MECHANICAL DATA
* Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Solderable per MIL-STD-202,
method 208 guranteed * Polarity: Color band denotes cathode end except Bidirectional * Mounting position: Any
.103(2.62) .079(2.00)
.050(1.27) .030(0.76)
.280(7.11) .260(6.60)
.012(0.31).
Part Number |
SMDJ64 |
Manufacturers |
SOCAY |
Logo |
|
Description |
Surface Mount Transient Voltage Suppressors |
Datasheet |
SMDJ64 Datasheet (PDF) |
Surface Mount Transient Voltage Suppressors (TVS)
SMDJ Series 5.0 To 440 V 3000W
Description
The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition
rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds.
Part Number |
SMDJ64 |
Manufacturers |
UN Semiconducctor |
Logo |
|
Description |
Surface Mount Transient Voltage Suppressors |
Datasheet |
SMDJ64 Datasheet (PDF) |
Surface Mount Transient Voltage Suppressors (TVS)
SMDJ Series 5.0 To 440 V 3000W
Description
The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition
rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds.
Transient Voltage Suppressors
Transient Voltage Suppressors DO-214AB/SMC Package
SMDJ Series
FEATURE
Breakdown Voltage from 5.0 to 440V 3000W peak pulse power capability with a 10/1000μs waveform,
repetitive rate (duty cycle): 0.01% Glass passivated chip Excellent clamping capability, fast response time. Low incremental surge resistance, Low profile package Terminal: Solderable per MIL-STD-750, Method 2026 Epoxy: UL 94V-0 rate flame retardant UL/cUL safety approved: certification No: E223045
ELECTRICAL CHARACTERISTICS
Parameter
Symbols
Value
Peak power dissipation with a 10/1000µs waveform(1)
PPP 3000
Peak pulse current with a 10/1000μs waveform(1)
IPP See Next Table
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-wave unidirectional only. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Maximum instantaneous forward voltage at 25 A for unidirectional o.
2017-12-01 : SMDJ6.5 SMDJ7.0 SMDJ6.5A FR602 FR601 1N4942 1N4947 1N4948 1N4946 1N4942