SL74HC241
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
High-Performance Silicon-Gate CMOS
The SL74HC241 ...
SL74HC241
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
High-Performance Silicon-Gate
CMOS
The SL74HC241 is identical in pinout to the LS/ALS241. The device inputs are compatible with standard
CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This octal noninverting buffer/line driver/line receiver is designed to be used with 3-state memory address drivers, clock drivers, and other bus-oriented systems. The device has noninverting outputs and two output enables. Enable A is active-low and Enable B is active-high. Outputs Directly Interface to
CMOS, NMOS, and TTL Operating
Voltage Range: 2.0 to 6.0 V Low Input Current: 1.0 µA High Noise Immunity Characteristic of
CMOS Devices
ORDERING INFORMATION SL74HC241N Plastic SL74HC241D SOIC TA = -55° to 125° C for all packages
PIN ASSIGNMENT LOGIC DIAGRAM
FUNCTION TABLE
Inputs Enable A PIN 20=VCC PIN 10 = GND L L H A L H X Output YA L H Z Inputs Enable B H H L B L H X Output YB L H Z
X = don’t care Z = high impedance
SLS
System Logic Semiconductor
SL74HC241
MAXIMUM RATINGS *
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply
Voltage (Referenced to GND) DC Input
Voltage (Referenced to GND) DC Output
Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC P...