SL339
Quad Single Supply Comparator
The SL339 consists of four independent precision voltage comparators with an offset...
SL339
Quad Single Supply Comparator
The SL339 consists of four independent precision
voltage comparators with an offset
voltage specification as low as 2.0 mV max for four comparators which were designed specifically to operate from a single power supply over a wide range of
voltages. Application areas include limit comparators, simple analog to digital converters; pulse, squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high
voltage digital logic gates. Single or Split Supply Operation Low Input Bias Current Low Input Offset Current Input Common Mode
Voltage Range to Gnd Low Output Saturation
Voltage TTL and
CMOS Compatible
ORDERING INFORMATION SL339N Plastic SL339D SOIC TA = 0° to 70° C for all packages .
LOGIC DIAGRAM PIN ASSIGNMENT
PIN 3 = VCC PIN 12 = GND
SLS
System Logic Semiconductor
SL339
MAXIMUM RATINGS *
Symbol VCC Power Supply
Voltages Single Supply Split Supplies VIDR VICR ISC IIN TJ Tstg TL PD Input Differential
Voltage Range Input Common Mode
Voltage Range (1) Output Short Circuit to Ground Input Current, per pin (2) Junction Temperature Plastic Packages Storage Temperature Lead Temperature, 1mm from Case for 10 Seconds Power Dissipation @TA=25°C Plastic Package Derate above 25°C 150 -65 to +150 260 1.0 8.0 °C °C °C W mW/°C 36 ±18 36 -0.3 to VCC Continuous 50 mA V V V Parameter Value Unit
*
Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be res...