®
SG2525A SG3525A
REGULATING PULSE WIDTH MODULATORS
. . . . . . . . . .
8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED T...
®
SG2525A SG3525A
REGULATING PULSE WIDTH MODULATORS
. . . . . . . . . .
8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL SOFT-START PULSE-BY-PULSE SHUTDOWN INPUT UNDER
VOLTAGE LOCKOUT WITH HYSTERESIS LATCHING PWM TO PREVENT MULTIPLE PULSES DUAL SOURCE/SINK OUTPUT DRIVERS
DIP16
16(Narrow)
DESCRIPTION The SG3525Aseries of pulse width modulator integrated circuits are designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip + 5.1 V reference is trimmed to ± 1 % and the input common-mode range of the error amplifier includes the reference
voltage eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor betweenthe CT andthe dischargeterminals provide a wide range of dead time ad- justment. Thesedevicesalso featurebuilt-insoft-startcircuitry with only an external timing capacitor required. A shutdownterminal controls both the soft-start circuity and the output stages, providing instantaneous
turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands. These functions are also controlled by an under
voltagelockoutwhich keepsthe outputs off and the soft-start capacitor discharged for sub-normal input
voltages....