Philips Semiconductors
Product specification
Switched-mode power supply control circuit
NE/SE5560
DESCRIPTION
The NE...
Philips Semiconductors
Product specification
Switched-mode power supply control circuit
NE/SE5560
DESCRIPTION
The NE/SE5560 is a control circuit for use in switched-mode power supplies. This single monolithic chip incorporates all the control and housekeeping (protection) functions required in switched-mode power supplies, including an internal temperature-compensated reference source, internal Zener references, sawtooth generator, pulse-width modulator, output stage and various protection circuits.
PIN CONFIGURATION
D, F, N Packages
VCC 1 VZ 2 16 FEEDFORWARD 15 OUTPUT (COLL) 14 OUTPUT (EMIT) 13 DEMAG: OVER
VOLTAGE 12 GND 11 CURRENT LIMITING 10 REMOTE ON/OFF 9 EXTERNAL SYNC
FEEDBACK 3 GAIN 4
FEATURES
MODULATOR 5 DUTY CYCLE CONTROL 6 RT 7
Stabilized power supply Temperature-compensated reference source Sawtooth generator Pulse-width modulator Remote on/off switching Current limiting Low supply
voltage protection Loop fault protection Demagnetization/over
voltage protection Maximum duty cycle clamp Feed-forward control External synchronization
ORDERING INFORMATION
DESCRIPTION 16-Pin Plastic Dual In-Line Package (DIP) 16-Pin Plastic Small Outline Large (SOL) Package 16-Pin Plastic Dual In-Line Package (DIP) 16-Pin Cerdip Dual In-Line Package (CERDIP)
CT 8
SL00360
Figure 1. Pin Configuration
TEMPERATURE RANGE 0 to 70°C 0°C to 70°C -55°C to 125°C -55°C to 125°C
ORDER CODE NE5560N NE5560D SE5560N SE5560F
DWG # SOT38-4 SOT162-1 SOT38-4 0582B
ABS...