1.5A Synchronous Buck Converter with Integrated www.DataSheet4U.com Power Devices
POWER MANAGEMENT Description
The SC196...
1.5A Synchronous Buck Converter with Integrated www.DataSheet4U.com Power Devices
POWER MANAGEMENT Description
The SC196A is a synchronous step-down converter with integrated power devices. The SC196A is designed for single-cell Li-Ion battery applications but can also be used in fixed 3.3V or 5V applications. The switching frequency is nominally set to 1MHz, allowing the use of small inductors and
capacitors. The maximum current rating of the internal
MOSFET switches allows a DC output current of 1.5A. Four programable output
voltages 1.00V/1.05V/1.20V/ 1.80V are available. See SC196 with external feedback for other output
voltage settings. The SC196A has a flexible clocking methodology that allows it to be synchronized to an external oscillator or controlled by the internal oscillator. The device can operate in either forced PWM mode or in PSAVE mode. If PSAVE mode is enabled, the part will automatically enter PFM at light loads to maintain maximum efficiency across the full load range. For noise sensitive applications, PSAVE mode can be disabled by synchronizing to an external oscillator or pulling the SYNC/PWM pin high. Shutdown turns off all the control circuitry to achieve a typical shutdown current of 0.1μA.
SC196A
Features
Up to 93% efficiency 1.00V/1.05V/1.20V/1.80V selectable output
voltage Output current — 1.5A Quiescent current — 17μA Input range — 2.7V to 5.5V Dynamic
voltage positioning capability Fixed 1MHz frequency or 750kHz to 1.25M...