SC1405B

High Speed Synchronous Power MOSFET Smart Driver POWER MANAGEMENT Description The SC1405B is a Dual-MOSFET Driver with an internal Overlap Protection Circuit to prevent shoot-through. Each driver is capable of driving a 3000pF load in 15ns rise/ fall time and has ULTRA-LOW propagation delay from input transition to the gate of the power FET’s. Adaptive Overlap Protection circuit ensures that the synchronous FET does not turn on until the top FET source has reached a voltage low enough to prevent shoot-through. The delay between the bottom gate going low to the top gate transitioning high is externally programmable via a capacitor to minimize dead time. The bottom FET may be disabled at light loads by keeping S_MOD low to trigger asynchronous operation, thus saving the bottom FET’s gate drive current and inductor ripple current. An internal voltage reference allows threshold adjustment for an Output Over-Voltage protection circuitry, independent of the PWM controller. Under-Voltage-Lock-Out circuit is included to guarantee that both driver outputs are off when Vcc is less than or equal to 4.4V (typ) at supply ramp up (4.35V at supply ramp down). A CMOS output provides status indication of the 5V supply. A low enable input places the IC in standby mode, reducing supply current to less than 10µA. SC1405B is offered in a high pitch (.025” lead spacing) TSSOP package. SC1405B Features ‹ Fast rise and fall times (15ns with 3000pf load) ‹ 14ns max. Propagation delay (BG going low)...