S6B0741

S6B0741 128 SEG / 129 COM DRIVER & CONTROLLER FOR 4 GRAY SCALE STN LCD August 6. 2000. Ver. 2.1 Prepared by: Hyung-Suk, Kim [email protected] Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. 128 SEG / 129 COM DRIVER & CONTROLLER FOR STN LCD S6B0741 S6B0741 Specification Revision History Version 0.0 0.1 0.2 0.3 Preliminary specification (short form) Preliminary specification (full set) Added temporary pin number (page 5,6) Content Date June 8, 1999 July 14, 1999 July 15, 1999 0.4 0.5 0.6 0.7 1.0 1.1 Removed HPMB, CS2 pins July 30, 1999 CS1B pin → CSB pin VOL Max.: 0.3VDD → 0.2VDD , VOH Min.: 0.7VDD → 0.8VDD (page 59) Removed CLS, OSCCK, OSC2 pins (page 7,8) Read internal status: MF, DS ID is added, ADC is removed (Page 35, 39) Aug. 12, 1999 RESET flag: 0: display ON, 1: display OFF → 0: display OFF, 1: display ON (Page 39) Changed input pin order, add RESETB pin (page 5) Added VR, VEXT pin connection (page 8) VR: When using internal resistors (INTRS = "H"), open this pin VEXT: When using internal voltage regulator, connect to VDD, VSS or open this pin Added test pin connection (page 9) Aug. 30, 1999 TEST1,TEST2: connect to “VDD” TEST3,TEST4,TEST5: connect to “VSS” Changed OSC resistance connection (page8, 23) Between OSC1 and OSC2 → between OSC1 and VDD Rem...