Crimp
PH CONNECTOR
Disconnectable Crimp style connectors
• Reliable contact
current circuits.
Emboss Tape
2.0mm
(.079...
Crimp
PH CONNECTOR
Disconnectable Crimp style connectors
Reliable contact
current circuits.
Emboss Tape
2.0mm
(.079") pitch
Features ––––––––––––––––––––––––
The contact has long dimples near the center to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low
voltage and low
www.DataSheet4U.com
Fully shrouded header
The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants.
Printed circuit board retention mechanism
The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately.
Surface mount model (SMT)
This connector is also available in a surface mount
This is a thin, low-profile 2.0mm (.079") pitch connector 7.5mm (.295") in height after mounting and 4.5mm (.177") in width. It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.
configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products.
Specifications –––––––––––––––––––
Current rating: 2A AC, DC (AWG #24)
Voltage rating...