2.4GHz Front End Module
RF6535
3.0V to 4.2V, 2.4GHz Front End Module
Package Style: QFN, 20-Pin, 3.5mm x 3.5mm x 0.5mm
TXCT GND VCC_BAIS VCC NC...
Description
RF6535
3.0V to 4.2V, 2.4GHz Front End Module
Package Style: QFN, 20-Pin, 3.5mm x 3.5mm x 0.5mm
TXCT GND VCC_BAIS VCC NC
Features
TX Output Power: 23dBm TX Gain: 28dB RX Gain: 11.5dB RX NF: 3dB Integrated LNA
Applications
ZigBee® 802.15.4 Based Systems for Remote Monitoring and Control
WiFi 802.11b/g 2.4GHz ISM band
applications Smart Meters for Energy
Management
15 14 13 12 TXN 16 TXP 17 RXCT 18 RXBN 19 RXBP 20
12 3 4
11
10 VCC 9 GND ANT 8 ANT1 7 GND 6 ANT2
5
SDN VCC ANT_SEL CTL NC
Functional Block Diagram
Product Description
The RF6535 integrates a complete solution in a single Front End Module (FEM) for WiFi and ZigBee® applications in the 2.4GHz to 2.5GHz band. This FEM integrates the PA plus harmonic filter in the transmit path and an LNA in the receive side. It also integrates a diversity switch and provides balanced input and output signals for both the TX and RX paths respectively.
The RF6535 FEM is ideal for ZigBee® systems operating with a minimum output power of 20dBm and high efficiency requirements. On the receive path, the LNA provides 11.5dB of typical gain with only 8mA of current and excellent NF down to 3dB. This FEM meets or exceeds the system requirements for WiFi and ZigBee® applications operating in the 2.4GHz to 2.5GHz band. The device is provided in a 3.5mm x 3.5mm x 0.5mm, 20-pin QFN package.
Ordering Information
RF6535SQ RF6535SR RF6535TR13 RF6535PCK-410
Standard 25 piece bag Standard 100 piece reel Standard 2500 piece reel ...
Similar Datasheet