PL602-00
Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals
FE AT UR E S
Integrated crystal oscillator c...
PL602-00
Multiplier XO IC Die for 12 to 25MHz Parallel Resonant Crystals
FE AT UR E S
Integrated crystal oscillator circuitry (XO). Low phase noise (-125dBc @ 10kHz offset and
155.52MHz output) Selectable frequency multipliers (x1, x2, x4, x8
as bonding options). 3.3V supply
voltage. Uses inexpensive fundamental-mode parallel
resonant crystals (from 12 to 25MHz). Selectable High Drive (30mA) or Standard Drive
(10mA) output. Available in DIE (65 mil x 62 mil).
DESCRIPTION
The PL602-00 is a monolithic low jitter and low phase noise (-125dBc @10kHz offset and 155.52MHz output), high performance
CMOS XO IC. This flexible device can be used as a XO with output frequencies ranging from F XIN x 1 to FXIN x 8 thanks to selector pads allowing bonding options (see Divider Selection Table on this page). This makes the PL602-00 ideal for a wide range of applications from 12MHz to 200MHz (including 50MHz, 77.76MHz, 125MHz and 155.52MHz, etc.).
BLOCK DIAGRAM
S[0:2]
XIn XOut
XO
Selectable PLL
CLK
DIE SPECIFICATIONS
Name
Size Reverse side Pad dimensions
Th ic kn e s s
Value
62 x 65 mil GND
80 m icron x 80 micron 8 mil
OE^ VDD VDD S0V S1V S2V
DIE CONFIGURATION
65 mil
25 23 21 20 19 18
XIN 27
Die ID: 4444-44
(1550,1475)
XOUT 29
13 CLK
62 mil GND
C502B
10 GND
7
(0,0)
Y X
Note:
^ denotes internal pull up V denotes internal pull down
MULTIPLIER SELECTION
SELECTION S2 S1 S0 000 001
010 100
011 110 101
111
FXIN 12MHz – 25MHz
CLK (MHz)
FXIN x 2 FXIN x 4 FXIN...