PL586-18

(Preliminary) PL586-15/-18 Low Phase Noise, LVPECL VCXO (for 75M Hz to 125M Hz Fundamental Crystals) FEATURES           Advanced non multiplier VCXO Design for High Performance Crystal Oscillators Input/Output Range: 75MHz to 125MHz Very Low Phase Noise: <-150dBc at 100KHz Very low Phase Jitter: 120fs RMS at 125MHz High Pull Range: ±125ppm Linearity: <5% Integrated Variable Capacitors Complementary LVPECL Outputs Power Supply: 3.3V ±10% Available in Die or Wafer Form DIE CONFIGURATION 0.952mm VDD 6 0.952mm XIN 7 4 QB 5 Q 3 XOUT 8 Die ID 1 2 VSS OE DESCRIPTION The PL586-15/-18 is a non-multiplier VCXO IC specifically designed to pull fundamental mode crystals from 75MHz to 125MHz. This IC achieves a typical pull range of ±125ppm with 5% linearity. The phase noise performance, with <120fs phase jitter, makes this an ideal solution for all high end clocking applications such as SONET, WiMax, CPRI, OBSAI, Fiber Channel, and any application where performance and quality are required. VCON (0,0) OUTPUT ENABLE LOGIC PL586-15 OE State (Pad 4) 0 1 (Default) Output Buffers State Outputs Tri-Stated Outputs Enabled DIE SPECIFICATIONS Name Size Reverse side Pad dimensions Thickness Value 952 micron x 952 micron GND 80 micron x 80 micron 8 mil * Internal 60KΩ pull-up resistor OUTPUT ENABLE LOGIC PL586-18 OE State (Pad 4) 0 (Default) 1 Output Buffers State Outputs Enabled Outputs Tri-Stated * Internal 60KΩ pull-down resistor BLOCK DIAGRAM OE XIN XOUT VCON Xtal...