Low Skew Zero Delay Buffer
FE AT UR E S
Frequency Range 10MHz to 220MHz Zero input - output delay. Low Output to Output Skew Optional Drive...
Description
FE AT UR E S
Frequency Range 10MHz to 220MHz Zero input - output delay. Low Output to Output Skew Optional Drive Strength:
Standard (8mA) PL123E-09 High (12mA) PL123E-09H 2.5V or 3.3V, ±10% operation. Available in 16-Pin SOP or TSSOP packages
(Preliminary) PL123E-09
Low Skew Zero Delay Buffer
DESCRIPTION The PL123E-09 (-09H for High Drive) is a high performance, low skew, low jitter zero delay buffer designed to distribute high speed clocks. It has two low-skew output banks, of 4 outputs each, that are synchronized with the input. Control of the two banks of outputs is achieved by using the S1 and S2 inputs as shown in the Selector Definition table on page 2. The synchronization is established via CLKOUT feed back to the input of the PLL. Since the skew between the input and output is less than 100ps, the device acts as a zero delay buffer. The input output propagation delay can be advanced or delayed by adjusting the load on the CLKOUT pin. These parts are...
Similar Datasheet