OBSOLETE
Product Description
The PE42671 is a HaRP™-enhanced SP7T RF Switch developed on the UltraCMOS™ process technol...
OBSOLETE
Product Description
The PE42671 is a HaRP™-enhanced SP7T RF Switch developed on the Ultra
CMOS™ process technology. It addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market for use in GSM/PCS/ EDGE/WCDMA handsets. The switch is comprised of two transmit ports that can be used for GSM/PCS/EDGE, two transmit/receive ports (TRX1 and TRX2) that can be used for either WCDMA or as receive ports, and three symmetric receive ports. On-chip
CMOS decode logic facilitates three-pin low
voltage CMOS control, while high ESD tolerance of 1000 V at all ports, no blocking capacitor requirements, and on-chip SAW filter over-
voltage protection devices make this the ultimate in integration and ruggedness.
Peregrine’s HaRP™ technology enhancements deliver high linearity and exceptional harmonics performance. It is an innovative feature of the Ultra
CMOS™ process, providing performance superior to GaAs with the economy and integration of conventional
CMOS.
Product Specification
PE42671
SP7T Ultra
CMOS™ 2.75 V Switch 100 – 3000 MHz, +68 dBm IIP3
Features
2 TX, 2 TRX, 3 RX ports Three pin
CMOS logic control with
integral decoder/driver Exceptional harmonic performance:
2fo = -83 dBc and 3fo = -77.5 dBc Low TX insertion loss: 0.65 dB at
900 MHz, 0.75 dB at 1900 MHz TX – RX Isolation of 46 dB at 900 MHz,
38 dB at 1900 MHz 1000 V HBM ESD tolerance all ports +68 dBm IIP3 @ 50 Ω -111 dBm IMD3 No blocking
capacitors required
Figure 1. Fun...