P6KE Datasheet
Part Number |
P6KE |
Manufacturers |
Littelfuse |
Logo |
|
Description |
Transient Voltage Suppression Diodes |
Datasheet |
P6KE Datasheet (PDF) |
P6KE Series
TVS Diodes
Axial Leaded – 600W > P6KE series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.2) by 10/1000us
Test Waveform(Fig.4)(Note 1)
PPPM
-Single Die Parts
Peak Pulse Power Dissipation(Fig.2) by
10/1000us Test Waveform(Fig.4)(Note 1)
PPPM
-Stacked Die Parts(Note 4)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
PD
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
600
W
800
W
5.0
W
100
A
Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3)
VF
3.5/5.0 V
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
Typical Thermal Resistance Junction to Ambient RƟJA
20 °C/W 75 °C/W
Notes: 1. Non-repetitive current .
Part Number |
P6KE |
Manufacturers |
STMicroelectronics |
Logo |
|
Description |
transient voltage surge suppressor |
Datasheet |
P6KE Datasheet (PDF) |
P6KE
Transil™, transient voltage surge suppressor (TVS)
Features
■ Peak pulse power: 600 W (10/1000 µs ) ■ Stand-off voltage range 6.8 to 440 V ■ Unidirectional and bidirectional types ■ Low clamping factor ■ Fast response time ■ UL recognized
Complies with the following standards
■ IEC 61000-4-2 level 4 – 15 kV (air discharge) – 8 kV (contact discharge)
■ MIL STD 883G, method 3015-7 Class 3 – HBM (human body model)
Description
Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC’s.
Datasheet − produ.
Transient Voltage Suppression Diodes
P6KE Series
TVS Diodes
Axial Leaded – 600W > P6KE series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.2) by 10/1000us
Test Waveform(Fig.4)(Note 1)
PPPM
-Single Die Parts
Peak Pulse Power Dissipation(Fig.2) by
10/1000us Test Waveform(Fig.4)(Note 1)
PPPM
-Stacked Die Parts(Note 4)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
PD
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
600
W
800
W
5.0
W
100
A
Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3)
VF
3.5/5.0 V
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
Typical Thermal Resistance Junction to Ambient RƟJA
20 °C/W 75 °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. 4. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics.
Description
The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and ot.
2016-10-10 : LM7809 PSB8510-1 PSB8510-2 PSB8510-4 PSB8510-6 PSB8510-1P PSB8510-1T PSB8510-6P PSB8510-6T MSP3405D