www.DataSheet4U.com P036F048T12AL
PRM PRMTM
Regulator
• 36 V input V•I ChipTM PRM • Vin range 18 – 60 Vdc • High densit...
www.DataSheet4U.com P036F048T12AL
PRM PRMTM
Regulator
36 V input VI ChipTM PRM Vin range 18 – 60 Vdc High density – 407 W/in3 Small footprint – 1.1 in2 Low weight – 0.5 oz (15 g) Adaptive Loop feedback ZVS buck-boost regulator 1.35 MHz switching frequency 95% Efficiency 125˚C operation (Tj) Vin = 18 – 60 Vdc Vf = 26 – 55 Vdc Pf = 120 W If = 2.5 A
©
Product Description
The VI Chip Pre-Regulator Module is a very efficient non-isolated regulator capable of both boosting and bucking a wide range input
voltage. It is specifically designed to provide a controlled Factorized Bus distribution
voltage for powering downstream VI Chip
Voltage Transformation Modules — fast, efficient, isolated, low noise Point-of-Load (POL) converters. In combination, PRMs and VTMsTM form a complete DC-DC converter subsystem offering all of the unique benefits of Vicor’s Factorized Power Architecture (FPA): high density and efficiency; low noise operation; architectural flexibility; extremely fast transient response; and elimination of bulk capacitance at the Point-of-Load (POL). In FPA systems, the POL
voltage is the product of the Factorized Bus
voltage delivered by the PRM and the "K-factor" (the fixed
voltage transformation ratio) of a downstream VTM. The PRM controls the Factorized Bus
voltage to provide regulation at the POL. Because VTMs perform true
voltage division and current multiplication, the Factorized Bus
voltage may be set to a value that is substantially higher t...