Optically Coupled Isolator OPI110, OPI1264 Series
Features: 15 kV electrical isolation Choice of phototransistor L...
Optically Coupled Isolator OPI110, OPI1264 Series
Features: 15 kV electrical isolation Choice of phototransistor Low-cost plastic housing UL recognized File No. E58730
Description:
Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The OPI110 and OPI1264 devices have 890 nm Light Emitting Diode (LED) and NPN phototransistor sensor. The devices are sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor.
The Optoisolators in this data sheet are UL recognised under E58730.
This series is designed for transmission of information between one power supply
voltage and another where the potentials during surge conditions are not greater than the guaranteed isolation
voltage.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information.
Applications:
High
voltage isolation between input and output Electrical isolation in dirty environments Industrial equipment Medical equipment
Part Number
LED Peak
Wavelength
OPI110
OPI110A
OPI110B
OPI110C OPI1264
890 nm
OPI1264A
OPI1264B
OPI1264C
Ordering Information
Sensor
Isolation
Voltage
(,000)
CTR Min /
Max
IF (mA) Typ / Max
VCE (Volts)
Max
12.5 / NA
Lead Length /
Spacing
Transistor
25 / NA 50 / 125
10 / 40
100 / NA 15
12.5 / NA
30 0.50" / 0.55"
Transistor
25 / NA 50 / 125
10 / 40
100 / NA
General Note TT Electroni...