OPI110A

Optically Coupled Isolator OPI110, OPI1264 Series Features:  15 kV electrical isolation  Choice of phototransistor  Low-cost plastic housing  UL recognized File No. E58730 Description: Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The OPI110 and OPI1264 devices have 890 nm Light Emitting Diode (LED) and NPN phototransistor sensor. The devices are sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor. The Optoisolators in this data sheet are UL recognised under E58730. This series is designed for transmission of information between one power supply voltage and another where the potentials during surge conditions are not greater than the guaranteed isolation voltage. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications:  High voltage isolation between input and output  Electrical isolation in dirty environments  Industrial equipment  Medical equipment Part Number LED Peak Wavelength OPI110 OPI110A OPI110B OPI110C OPI1264 890 nm OPI1264A OPI1264B OPI1264C Ordering Information Sensor Isolation Voltage (,000) CTR Min / Max IF (mA) Typ / Max VCE (Volts) Max 12.5 / NA Lead Length / Spacing Transistor 25 / NA 50 / 125 10 / 40 100 / NA 15 12.5 / NA 30 0.50" / 0.55" Transistor 25 / NA 50 / 125 10 / 40 100 / NA General Note TT Electroni...