®
OPA 678
OPA678
OPA
678
Wideband Switched-Input OPERATIONAL AMPLIFIER
FEATURES
q FAST SETTLING: 11ns (1%) q WIDE BA...
®
OPA 678
OPA678
OPA
678
Wideband Switched-Input OPERATIONAL AMPLIFIER
FEATURES
q FAST SETTLING: 11ns (1%) q WIDE BANDWIDTH: 200MHz q TWO LOGIC SELECTABLE INPUTS q LOW OFFSET
VOLTAGE: ±380µV q FAST INPUT SWITCHING: 4ns q ACCEPTS TTL/ECL SWITCHING SIGNALS q UNITY GAIN STABLE q 16-PIN DIP AND SO-16 PACKAGES
APPLICATIONS
q VIDEO AMPLIFICATION AND SWITCHING q FAST 2-INPUT MULTIPLEXER q PULSE/RF
AMPLIFIERS q PROGRAMMABLE-GAIN AMPLIFIER q ACTIVE FILTERS q SYNCHRONOUS DEMODULATOR q LOW COST REPLACEMENT FOR OPA675/676
DESCRIPTION
The OPA678 is a wideband monolithic operational amplifier with two independent differential inputs. Either input can be selected by an external TTL or ECL logic signal. The amplifier is externally compensated and features a very fast input selection speed, 4ns for either ECL or TTL. This amplifier features fully symmetrical differential inputs due to its “classical”
operational amplifier circuit architecture. Unlike “current-feedback” amplifier designs, the OPA678 may be used in all op amp applications requiring high speed and precision. Low distortion and crosstalk make this amplifier suitable for RF and video applications. The OPA678 is available in plastic DIP and SO-16 packages.
– Input A + Enable A Output Enable B – Input B + B Compensation A
A/B Channel Select Input (TTL or ECL)
International Airport Industrial Park Mailing Address: PO Box 11400, Tucson, AZ 85734 Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 Tel: (520) 746-1111...