a
FEATURES Operates from +1.7 V to ؎18 V Low Supply Current: 15 A/Amplifier Low Offset Voltage: 75 V Outputs Sink and...
a
FEATURES Operates from +1.7 V to ؎18 V Low Supply Current: 15 A/Amplifier Low Offset
Voltage: 75 V Outputs Sink and Source: ؎8 mA No Phase Reversal Single or Dual Supply Operation High Open-Loop Gain: 600 V/mV Unity-Gain Stable APPLICATIONS Digital Scales Strain Gages Portable Medical Equipment Battery Powered Instrumentation Temperature Transducer Amplifier
OUT A –IN A +IN A V–
NULL –IN A +IN A V–
Precision, Micropower Operational
Amplifiers OP193/OP293/OP493*
PIN CONFIGURATIONS 8-Lead SO (S Suffix)
NC V+ NULL 1 –IN A 2 +IN A 3 V– 4 NC = NO CONNECT
8-Lead Epoxy DIP (P Suffix)
OP193
8 7 6 5
NC V+ OUT A NULL
OP193
OUT A NULL
8-Lead SO (S Suffix)
V+
8-Lead Epoxy DIP (P Suffix)
GENERAL DESCRIPTION
The OP193 family of single-supply operational
amplifiers features a combination of high precision, low supply current and the ability to operate at low
voltages. For high performance in single supply systems the input and output ranges include ground, and the outputs swing from the negative rail to within 600 mV of the positive supply. For low
voltage operation the OP193 family can operate down to 1.7 volts or ± 0.85 volts. The combination of high accuracy and low power operation make the OP193 family useful for battery powered equipment. Its low current drain and low
voltage operation allow it to continue performing long after other
amplifiers have ceased functioning either because of battery drain or headroom. The OP193 family is specified for single +2 volt through d...