a
Rail-to-Rail High Output Current Operational Amplifiers
FEATURES Rail-to-Rail Inputs and Outputs High Output Current...
a
Rail-to-Rail High Output Current Operational
Amplifiers
FEATURES Rail-to-Rail Inputs and Outputs High Output Current: ؎60 mA Single Supply: 5 V to 12 V Wide Bandwidth: 5 MHz High Slew Rate: 3 V/s Low Distortion: 0.01% Unity-Gain Stable No Phase Reversal Short-Circuit Protected Drives Capacitive Loads: 10 nF
APPLICATIONS Multimedia Telecom DAA Transformer Driver LCD Driver Low
Voltage Servo Control Modems FET Drivers
GENERAL DESCRIPTION The OP179 and OP279 are rail-to-rail, high output current, single-supply
amplifiers. They are designed for low
voltage applications that require either current or capacitive load drive capability. The OP179/OP279 can sink and source currents of ± 60 mA (typical) and are stable with capacitive loads to 10 nF.
Applications that benefit from the high output current of the OP179/OP279 include driving headphones, displays, transformers and power transistors. The powerful output is combined with a unique input stage that maintains very low distortion with wide common-mode range, even in single supply designs.
The OP179/OP279 can be used as a buffer to provide much greater drive capability than can usually be provided by
CMOS outputs.
CMOS ASICs and DAC often have outputs that can swing to both the positive supply and ground, but cannot drive more than a few milliamps.
Bandwidth is typically 5 MHz and the slew rate is 3 V/µs, making these
amplifiers well suited for single supply applications that require audio bandwidths when used in high gain co...