Product Bulletin OP245PS November 2000
Plastic Point Source Infrared Emitting Diode
Type OP245PS
Anode
Cathode
Featu...
Product Bulletin OP245PS November 2000
Plastic Point Source Infrared Emitting Diode
Type OP245PS
Anode
Cathode
Features Point source irradiance pattern s peak Wavelength matched to silicon’ Fast switching speed Side-looking package for space limited
applications response
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Reverse
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Peak Forward Current (2 µs pulse width, 0.1% duty cycle). . . . . . . . . . . . . . . . . . 1.0 A Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40°C to +100°C Lead Soldering Temperature [1/16 inch (1.6mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C (1) Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
NOTES: (1) RMA flux is recommended. Duration can be ex tended to 10 seconds maximum when flow soldering. A maximum of 20 grams force may be applied to the leads when soldering. (2) Derate linearly 1.33 mW/ ° C above 25 ° . (3) E e(APT) is a measurement of the average apertured radiant in cidence upon a sensing area 0.180”(4.57 mm) in diameter, perpendicular to and centered on the mechanical axis ...