Philips Semiconductors
Product specification
Switched-mode power supply control circuit
NE/SE5561
DESCRIPTION
The NE...
Philips Semiconductors
Product specification
Switched-mode power supply control circuit
NE/SE5561
DESCRIPTION
The NE5561/SE5561 is a control circuit for use in switched-mode power supplies. It contains an internal temperature- compensated supply, PWM, sawtooth oscillator, overcurrent sense latch, and output stage. The device is intended for low cost SMPS applications where extensive housekeeping functions are not required.
PIN CONFIGURATION
D, FE, N Packages
VCC VZ
1 2 3 4
8 7 6 5
GND OUTPUT CURRENT SENSE RT, CT
FEATURES
FEEDBACK GAIN
Micro-miniature (D) package Pulse-width modulator Current limiting (cycle-by-cycle) Sawtooth generator Stabilized power supply Double pulse protection Internal temperature-compensated reference
ORDERING INFORMATION
DESCRIPTION 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Ceramic Dual In-Line Package (CERDIP) 8-Pin Small Outline (SO) Package
Figure 1. Pin Configuration
APPLICATIONS
Switched-mode power supplies DC motor controller inverter DC/DC converter
TEMPERATURE RANGE 0 to +70°C -55 to +125°C -55 to +125°C 0 to +70°C
ORDER CODE NE5561N SE5561N SE5561FE NE5561D
DWG # SOT97-1 SOT97-1 0580A SOT96-1
BLOCK DIAGRAM
RT, CT 5 REF
VOLTAGE SAWTOOTH GENERATOR VCC
+ ERROR AMP FEEDBACK 3 – PWM R GAIN 4
7 S LATCH
OUTPUT
0.5V
–
STABILIZED SUPPLY 1 8 GND
8.2V 2 VZ
CURRENT SENSE
6
+
VCC
SL00385
Figure 2. Block Diagram
1994 Aug 31
1
853-0889 13721
Philips Semicon...