Philips Semiconductors Linear Products
Product specification
8-Bit µp-compatible D/A converter
NE/SE5018/5019
DESCRI...
Philips Semiconductors Linear Products
Product specification
8-Bit µp-compatible D/A converter
NE/SE5018/5019
DESCRIPTION
The NE/SE5018/19 is a complete 8-bit digital-to-analog converter subsystem on one monolithic chip. The data inputs have input latches which are controlled by a latch enable pin. The data and latch enable inputs are ultra-low loading for easy interfacing with all logic systems. The latches appear transparent when the LE input is in the low state. When LE goes high, the input data present at the moment of transition is latched and retained until LE again goes low. This feature allows easy compatibility with most microprocessors. The chip also comprises a stable
voltage reference (5V nominal) and high slew rate buffer amplifier. The
voltage reference may be externally trimmed with a potentiometer for easy adjustment of full-scale while maintaining a low temperature coefficient. The output of the buffer amplifier may be offset so as to provide bipolar as well as unipolar operation.
PIN CONFIGURATIONS
F, N Packages
DIGITAL GND 1 DB0(LSB) 2 DB1 3 DB2 4 DB3 5 DB4 6 DB5 7 DB6 8 DB7(MSB) 9 LE 10 NC 11 22 ANALOG GND 21 AMP COMP 20 SUM MODE 19 V CC+ 18 V 17 VCC– 16 DAC COMP 15 BIPOLAR OFFSET R 14 V REFIN 13 V OUT
OUT
REF
12 V REFADJ
D Package1
FEATURES
8-bit resolution Input latches Low-loading data inputs On-chip
voltage reference Output buffer amplifier Accurate to ± LSB (0.19%) Monotonic to 8 bits Amplifier and reference both short-circu...