NCP5358
Gate Driver for Desktop Power Systems
The NCP5358 is a high performance two channel gate driver. It combines two...
NCP5358
Gate Driver for Desktop Power Systems
The NCP5358 is a high performance two channel gate driver. It combines two single NCP5359 gate drivers together and provides an optimized solution for multi−phase application. Each channel gate driver has both high−side and low side power
MOSFETs in a synchronous buck converter. Also, it can drive up to 3 nF load with a 25 ns propagation delay and 20 ns transition time.
An adaptive non−overlap and power saving operation circuit has built in. It can provide a low switching loss and high efficiency solution in notebook and desktop systems. Thus, this controller has three protection functions, under
voltage lockout (UVLO), over
voltage protection (OVP) and thermal shutdown.
The NCP5358 is available in 4x4 mm QFN16 package.
Features
Faster Rise and Fall Times Thermal Shutdown Protection Adaptive−Non−Overlap Circuit Floating Top Driver Accommodates Boost
voltage of up to 30 V Output Disable Control Turn Off Both
MOSFETs Complies with VR11.1 Specifications Under−
Voltage Lock Out Power Saving Operation under Light Load Condition Thermally Enhanced Package Available These are Pb−Free Devices
Typical Applications
Power Solutions for Desktop and Notebook system.
http://onsemi.com
MARKING DIAGRAM
QFN−16 CASE 485D
4x4 mm
N5358 ALYWG
G
N5358 A L Y W
G
= Device Code = Assembly Location = Wafer Lot = Year = Work Week
= Pb−Free Package
PIN CONNECTIONS
EN PWM1 PWM2 GND
VCC SW1
DRVH1
BST1
SW2 DRVH2 BST2 VCCP
DRVL2 P...