NCP5010
500 mW Boost Converter for White LEDs
The NCP5010 is a fixed frequency PWM boost converter with integrated rec...
NCP5010
500 mW Boost Converter for White LEDs
The NCP5010 is a fixed frequency PWM boost converter with integrated rectification optimized for constant current applications such as driving white LEDs. This device features small size, minimal external components and high−efficiency for use in portable applications and is capable of providing up to 500 mW output power to 2−5 series connected white LEDs. A single resistor sets the LED current and the CTRL pin can be pulse width modulated (PWM) to reduce the LED Current.
The device includes True−Cutoff circuitry to disconnect the load from the battery when the device is put into standby mode. To protect the device, an output over
voltage protection, and short circuit protection have been incorporated. The NCP5010 is housed in a low profile, space efficient 1.7 x 1.7 mm Flip−Chip package. The device has been optimized for use with small inductors and ceramic
capacitors.
Features
http://onsemi.com
MARKING DIAGRAM
A1
8−Pin Flip−Chip FC SUFFIX
1 CASE 499AJ
DAXG AYWW
DAX G A Y WW
= Specific Device Code = Pb−Free Package = Assembly Location = Year = Work Week
2.7 to 5.5 V Input
Voltage Range Efficiency: 84% for 5 LED (VF = 3.5 V by LED) at 30 mA and
4.2 V VIN
Low Noise 1 MHz PWM DC−DC Converter Open LED Protection and Short Circuit Protection Serial LEDs Architecture for Uniform Current Matching 1 mA Shutdown Current Facility with True−Cutoff Very Small 8−Pin Flip−Chip 1.7 x 1.7 mm Package This is a Pb−Free Dev...