TinyLogic. Low Voltage UHS Dual SPST Normally Open Bus Switch
FSA266 • NC7WB66 Low Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch
May 2000 Revised December 2005
F...
FSA266 NC7WB66 Low
Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch
May 2000 Revised December 2005
FSA266 NC7WB66 Low
Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch
General Description
The FSA266 or NC7WB66 is an ultra high-speed (UHS) dual single-pole/single-throw (SPST) analog switch or 2-bit bus switch. The device is fabricated with advanced sub-micron
CMOS technology to achieve high speed enable and disable times and low On Resistance over a broad VCC range. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The device is organized as a dual switch with independent
CMOS compatible switch enable (OE) controls. When OE is HIGH, the switch is ON and Port A is connected to Port B. When OE is LOW, the switch is OPEN and a high-impedance state exists between the two ports. The enable inputs tolerate
voltages up to 5.5V independent of the VCC operating range.
Features
O Useful in both analog and digital applications O Space saving US8 surface mount package O MicroPak¥ Pb-Free leadless package : O Typical 7 On Resistance @ 5V VCC O Broad VCC operating range: 1.65V to 5.5V O Rail-to-Rail signal handling O Power down high impedance control inputs O Control inputs are over
voltage tolerant O Control inputs are
CMOS compatible O !300 MHz 3dB bandwidth
Ordering Code:
Product
Order Package Code
Package Description
Supplied As
Number Number Top Mark
FSA266K8X MAB08A
WB66 8-Lead US8, JEDEC MO-187, Variation CA ...