NC7SZ66

NC7SZ66 — Low Voltage Single SPST Normally Open Bus Switch September 2013 NC7SZ66 Low Voltage Single SPST Normally Open Bus Switch Features  Broad VCC Operating Range: 1.65 V to 5.5 V  Rail-to-Rail Signal Handling  Power Down High-Impedance Inputs/Outputs  5 Ω Switch Connection between Two Ports  Minimal Propagation Delay through the Switch  Low ICC  Zero Bounce in Flow-Through Mode  Control Input Compatible with CMOS Input Levels  Ultra-Small MicroPak™ Packages  Space-Saving SOT23 and SC70 Packages Description The NC7SZ66 is a ultra high-speed (UHS) CMOS compatible single-pole/single-throw (SPST) bus switch. The LOW on resistance of the switch allows inputs to be connected to outputs with minimal propagation delay and without generating additional ground bounce noise. The device is organized as a 1-bit switch with a switch enable (OE) signal. When OE is HIGH, the switch is on and port A is connected to port B. When OE is LOW, the switch is open and a high-impedance state exists between the two ports.. Ordering Information Part Number NC7SZ66M5X NC7SZ66P5X NC7SZ66L6X Top Mark 7Z66 Z66 EE Package 5-Lead SOT23, JEDEC MO-178 1.6 mm 5-Lead SC70, EIAJ SC-88a, 1.25 mm Wide 6-Lead, MicroPak™, 1x1 mm Wide Packing Method 3000 Units on Tape & Reel 3000 Units on Tape & Reel 5000 Units on Tape & Reel © 1996 Fairchild Semiconductor Corporation NC7SZ66 Rev. 1.0.5 www.fairchildsemi.com NC7SZ66 — Low Voltage Single SPST Normally Open Bus Switch Connection Diagrams P...