NC7SZ175 TinyLogic UHS D-Type Flip-Flop with Asynchronous Clear
May 1998 Revised May 2003
NC7SZ175 TinyLogic UHS D-T...
NC7SZ175 TinyLogic UHS D-Type Flip-Flop with Asynchronous Clear
May 1998 Revised May 2003
NC7SZ175 TinyLogic UHS D-Type Flip-Flop with Asynchronous Clear
General Description
The NC7SZ175 is a single positive edge-triggered D-type
CMOS Flip-Flop with Asynchronous Clear from Fairchild’s Ultra High Speed Series of TinyLogic in the space saving SC70 6-lead package. The device is fabricated with advanced
CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate
voltages up to 7V independent of VCC operating
voltage. This single flip-flop will store the state of the D input that meets the setup and hold time requirements on the LOW-to-HIGH Clock (CP) transition. A LOW input to Clear sets the Q output to LOW level. The Clear input is independent of clock.
Features
s Space saving SC70 6-lead package s Ultra small MicroPak leadless package s Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC s High Output Drive; ±24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/output s Over
voltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented
Ordering Code:
Order Number NC7SZ175P6X NC7SZ175L6X Package...