NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs
*Reduced Swing ECL
http://onsemi.com
The NBSG11...
NBSG11 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs
*Reduced Swing ECL
http://onsemi.com
The NBSG11 is a 1-to-2 differential fanout buffer, optimized for low skew and ultra-low JITTER. Inputs incorporate internal 50 W termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), CML, LV
CMOS, LVTTL, or LVDS. Outputs are RSECL (Reduced Swing ECL), 400 mV.
MARKING DIAGRAM*
SG 11 LYW
Maximum Input Clock Frequency up to 12 GHz Typical Maximum Input Data Rate up to 12 Gb/s Typical 30 ps Typical Rise and Fall Times 125 ps Typical Propagation Delay RSPECL Output with Operating Range: VCC = 2.375 V to 3.465 V with VEE = 0 V RSNECL Output with RSNECL or NECL Inputs with Operating Range: VCC = 0 V with VEE = -2.375 V to -3.465 V RSECL Output Level (400 mV Peak-to-Peak Output), Differential Output Only 50 W Internal Input Termination Resistors
FCBGA-16 BA SUFFIX CASE 489
QFN-16 MN SUFFIX CASE 485G
SG11 ALYW
Compatible with Existing 2.5 V/3.3 V LVEP, EP, and LVEL Devices
A = Assembly Location L = Wafer Lot Y = Year W = Work Week *For further details, refer to Application Note AND8002/D
ORDERING INFORMATION
Device NBSG11BA NBSG11BAR2 Package 4x4 mm FCBGA-16 4x4 mm FCBGA-16 3x3 mm QFN-16 3x3 mm QFN-16 Shipping 100 Units / Tray 500 / Tape & Reel
NBSG11MN NBSG11MNR2
123 Units / Rail 3000 / Tape & Reel
Board NBSG11BAEVB
Description NBSG11BA Evaluation Board
© Semiconductor Components Industries, LLC, 2003
1
April, 2003 - Rev. ...