DatasheetsPDF.com

NBB-X-K1 Datasheet

Part Number NBB-X-K1
Manufacturers RF Micro Devices
Logo RF Micro Devices
Description CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO 12GHz
Datasheet NBB-X-K1 DatasheetNBB-X-K1 Datasheet (PDF)

NBB-312 0 Typical Applications • Narrow and Broadband Commercial and Military Radio Designs • Linear and Saturated Amplifiers Product Description The NBB-312 cascadable broadband InGaP/GaAs MMIC amplifier is a low-cost, high-performance solution for general purpose RF and microwave amplification needs. This 50 Ω gain block is based on a reliable HBT proprietary MMIC design, providing unsurpassed performance for small-signal applications. Designed with an external bias resistor, the NBB-312 provi.

  NBB-X-K1   NBB-X-K1






CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO 12GHz

NBB-312 0 Typical Applications • Narrow and Broadband Commercial and Military Radio Designs • Linear and Saturated Amplifiers Product Description The NBB-312 cascadable broadband InGaP/GaAs MMIC amplifier is a low-cost, high-performance solution for general purpose RF and microwave amplification needs. This 50 Ω gain block is based on a reliable HBT proprietary MMIC design, providing unsurpassed performance for small-signal applications. Designed with an external bias resistor, the NBB-312 provides flexibility and stability. The NBB-310 is packaged in a low-cost, surface-mount ceramic package, providing ease of assembly for highvolume tape-and-reel requirements. It is available in either 1,000 or 3,000 piece-per-reel quantities. Connectorized evaluation board designs optimized for high frequency are also available for characterization purposes. 2.94 min 3.28 max Pin 1 Indicator 0.025 min 0.125 max Pin 1 Indicator RF OUT Ground RF IN CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO 12GHz • Gain Stage or Driver Amplifiers for MWRadio/Optical Designs (PTP/PMP/ LMDS/UNII/VSAT/WLAN/Cellular/DWDM) 0.50 nom 0.50 nom 1.00 min 1.50 max N6 Lid ID 1.70 min 1.91 max 2.39 min 2.59 max 0.38 nom Ground 0.98 min 1.02 max 0.37 min 0.63 max All Dimensions in Millimeters Notes: 1. Solder pads are coplanar to within ±0.025 mm. 2. Lid will be centered relative to frontside metallization with a tolerance of ±0.13 mm. 3. Mark to include two characters and dot to reference pin 1. Optimum Tec.


2005-05-12 : NTE5586    NTE5587    NTE5588    NTE5589    NTE5590    NTE5591    NTE5592    NTE5593    NTE5597    NTE56   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)