MX29F800CT

MX29F800C T/B 8M-BIT [1024K x 8 / 512K x 16] SINGLE VOLTAGE 5V ONLY FLASH MEMORY FEATURES GENERAL FEATURES Single Power Supply Operation - 4.5 to 5.5 volt for read, erase, and program operations 1,048,576 x 8 / 524,288 x 16 switchable Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector Sector Structure - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 15 Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors Latch-up protected to 100mA from -1V to Vcc + 1V Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash PERFORMANCE High Performance - Access time: 70ns - Byte/Word program time: 9us/11us (typical) - Erase time: 0.7s/sector, 8s/chip (typical) Low Power Consumption - Low active read current: 40mA (maximum) at 5MHz - Low standby current: 1uA (typical) Minimum 100,000 erase/program cycle 20 years data retention SOFTWARE FEATURES Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion HARDWARE FEATURES Ready/Busy# (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion Hardware Reset ...