MX25L802

MX25L802 8M-BIT [8M x 1] CMOS SERIAL FLASH EEPROM FEATURES GENERAL 8,388,608 x 1 bit structure 128 Equal Sectors with 8K-byte each - Any sector can be erased 2048 Equal Segments with 512-byte each - Provides sequential output within any segment www.DataSheet4U.com Single Power Supply Operation - 3.0 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V Low Vcc write inhibit is equal to or less than 2.5V PERFORMANCE High Performance - Fast access time: 20MHz serial clock (50pF + 1TTL Load) - Fast program time: 5ms/page (typical, 128-byte per page) - Fast erase time: 300ms/sector (typical, 8K-byte per sector) Low Power Consumption - Low active read current: 10mA (typical) at 17MHz - Low active programming current: 10mA (typical) - Low active erase current: 10mA (typical) - Low standby current: 30uA (typical, CMOS) Minimum 100,000 erase/program cycle SOFTWARE FEATURES Input Data Format - 1-byte Command code, 3-byte address, 1-byte byte address 512-byte Sequential Read Operation Built in 9-bit (A0 to A8) pre-settable address counter to support the 512-byte sequential read operation Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algroithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first) Status Register Feature - Pr...