DatasheetsPDF.com

MX25L8005 Datasheet

Part Number MX25L8005
Manufacturers MXIC
Logo MXIC
Description 8M-Bit CMOS Serial Flash
Datasheet MX25L8005 DatasheetMX25L8005 Datasheet (PDF)

MX25L8005 FEATURES 8M-BIT [x 1] CMOS SERIAL FLASH GENERAL • Serial Peripheral Interface compatible -- Mode 0 and Mode 3 • 8,388,608 x 1 bit structure • 256 Equal Sectors with 4K byte each - Any Sector can be erased individually • 16 Equal Blocks with 64K byte each - Any Block can be erased individually • Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 100mA from -1V to Vcc +1V PERFORMANCE • High Performance - Fast access time: 8.

  MX25L8005   MX25L8005






Part Number MX25L8006E
Manufacturers MXIC
Logo MXIC
Description CMOS SERIAL FLASH MEMORY
Datasheet MX25L8005 DatasheetMX25L8006E Datasheet (PDF)

MX25L8006E MX25L8006E 3V, 8M-BIT [x 1/x 2] CMOS SERIAL FLASH MEMORY Key Features • Hold Feature • Low Power Consumption • Auto Erase and Auto Program Algorithms • Additional 512 bit secured OTP for unique identifier P/N: PM1613 Rev. 1.6, August 28, 2017 1 MX25L8006E Contents FEATURES... 5 GENERAL DESCRIPTION... 6 PIN CONFIGURATIONS .. 7 PIN DESCRIPTION. 7 BLOCK DIAGRAM.

  MX25L8005   MX25L8005







8M-Bit CMOS Serial Flash

MX25L8005 FEATURES 8M-BIT [x 1] CMOS SERIAL FLASH GENERAL • Serial Peripheral Interface compatible -- Mode 0 and Mode 3 • 8,388,608 x 1 bit structure • 256 Equal Sectors with 4K byte each - Any Sector can be erased individually • 16 Equal Blocks with 64K byte each - Any Block can be erased individually • Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 100mA from -1V to Vcc +1V PERFORMANCE • High Performance - Fast access time: 86MHz serial clock - Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page) - Fast erase time: 60ms(typ.) and 120ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte per block) • Low Power Consumption - Low active read current: 12mA(max.) at 86MHz, and 4mA(max.) at 33MHz - Low active programming current: 15mA (max.) - Low active erase current: 15mA (max.) - Low standby current: 10uA (max.) - Deep power-down mode 1uA (typical) • Minimum 100,000 erase/program cycles • 10 years data retention SOFTWARE FEATURES • Input Data Format - 1-byte Command code • Block Lock protection - The BP0~BP2 status bit defines the size of the area to be software protected against Program and Erase instructions. • Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed.


2022-01-15 : SMAJ4728A    LM311    SMAJ4730A    SMAJ4729A    D78040    MX25L8005    SMAJ4731A    SMAJ4732A    SMAJ4733A    SMAJ4734A   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)