www.DataSheet4U.com
ML145554 ML145564 ML145557 ML145567 PCM Codec–Filter
Legacy Device: Motorola MC145554, MC145557, M...
www.DataSheet4U.com
ML145554 ML145564 ML145557 ML145567 PCM Codec–Filter
Legacy Device: Motorola MC145554, MC145557, MC145564, MC145567
The ML145554, ML145557, ML145564, and ML145567 are all per channel PCM Codec–Filters. These devices perform the voice digitization and reconstruction as well as the band limiting and smoothing required for PCM systems. They are designed to operate in both synchronous and asynchronous applications and contain an on–chip precision
voltage reference. The ML145554 (Mu–Law) and ML145557 (A–Law) are general purpose devices that are offered in 16–pin packages. The ML145564 (Mu–Law) and ML145567 (A–Law), offered in 20–pin packages, add the capability of analog loopback and push–pull power
amplifiers with adjustable gain. These devices have an input operational amplifier whose output is the input to the encoder section. The encoder section immediately low–pass filters the analog signal with an active R–C filter to eliminate very–high–frequency noise from being modulated down to the pass band by the switched capacitor filter. From the active R–C filter, the analog signal is converted to a differential signal. From this point, all analog signal processing is done differentially. This allows processing of an analog signal that is twice the amplitude allowed by a single–ended design, which reduces the significance of noise to both the inverted and non–inverted signal paths. Another advantage of this differential design is that noise injected via the pow...