DatasheetsPDF.com

ML145405 Datasheet

Part Number ML145405
Manufacturers LANSDALE Semiconductor
Logo LANSDALE Semiconductor
Description (ML145403 - ML145408) Drivers/Receivers
Datasheet ML145405 DatasheetML145405 Datasheet (PDF)

www.DataSheet4U.com ML145403 ML145404 ML145405 ML145408 Drivers/Receivers RS 232/EIA–232–E and CCITT V.28 Legacy Device: Motorola MC145403, MC145404, MC145405, MC145408 These devices are silicon gate CMOS ICs that combine both the transmitter and receiver to fulfill the electrical specifications of EIA Standard 232–E and CCITT V .28. The drivers feature true TTL input compatibility, slew rate limiting outputs, 300 Ω power–off source impedance, and output typically switching to within 25% of .

  ML145405   ML145405






Part Number ML145408
Manufacturers LANSDALE Semiconductor
Logo LANSDALE Semiconductor
Description (ML145403 - ML145408) Drivers/Receivers
Datasheet ML145405 DatasheetML145408 Datasheet (PDF)

www.DataSheet4U.com ML145403 ML145404 ML145405 ML145408 Drivers/Receivers RS 232/EIA–232–E and CCITT V.28 Legacy Device: Motorola MC145403, MC145404, MC145405, MC145408 These devices are silicon gate CMOS ICs that combine both the transmitter and receiver to fulfill the electrical specifications of EIA Standard 232–E and CCITT V .28. The drivers feature true TTL input compatibility, slew rate limiting outputs, 300 Ω power–off source impedance, and output typically switching to within 25% of .

  ML145405   ML145405







Part Number ML145407
Manufacturers LANSDALE Semiconductor
Logo LANSDALE Semiconductor
Description 5 Volt Only Driver/Receiver
Datasheet ML145405 DatasheetML145407 Datasheet (PDF)

www.DataSheet4U.com ML145407 5 Volt Only Driver/Receiver RS232 EIA–232–E and CCITT V.28 Legacy Device: Motorola MC145407 The ML145407 is a silicon–gate CMOS IC that combines three drivers and three receivers to fulfill the electrical specifications of RS232 EIA–232–E and CCITT V .28 while operating from a single + 5 V power supply. A voltage doubler and inverter convert the + 5V to ± 10 V . This is accomplished through an on–board 20 kHz oscillator and four inexpensive external electrolytic ca.

  ML145405   ML145405







Part Number ML145406
Manufacturers LANSDALE Semiconductor
Logo LANSDALE Semiconductor
Description Driver/Receiver
Datasheet ML145405 DatasheetML145406 Datasheet (PDF)

www.DataSheet4U.com ML145406 Driver/Receiver EIA 232–E and CCITT V.28 (Formerly RS–232–D) Legacy Device: Motorola MC145406 The ML145406 is a silicon–gate CMOS IC that combines three drivers and three receivers to fulfill the electrical specifications of standards EIA 232–E and CCITT V .28. The drivers feature true TTL input compatibility, slew–rate–limited output, 300–Ω power–off source impedance, and output typically switching to within 25% of the supply rails. The receivers can handle up to .

  ML145405   ML145405







Part Number ML145404
Manufacturers LANSDALE Semiconductor
Logo LANSDALE Semiconductor
Description (ML145403 - ML145408) Drivers/Receivers
Datasheet ML145405 DatasheetML145404 Datasheet (PDF)

www.DataSheet4U.com ML145403 ML145404 ML145405 ML145408 Drivers/Receivers RS 232/EIA–232–E and CCITT V.28 Legacy Device: Motorola MC145403, MC145404, MC145405, MC145408 These devices are silicon gate CMOS ICs that combine both the transmitter and receiver to fulfill the electrical specifications of EIA Standard 232–E and CCITT V .28. The drivers feature true TTL input compatibility, slew rate limiting outputs, 300 Ω power–off source impedance, and output typically switching to within 25% of .

  ML145405   ML145405







(ML145403 - ML145408) Drivers/Receivers

www.DataSheet4U.com ML145403 ML145404 ML145405 ML145408 Drivers/Receivers RS 232/EIA–232–E and CCITT V.28 Legacy Device: Motorola MC145403, MC145404, MC145405, MC145408 These devices are silicon gate CMOS ICs that combine both the transmitter and receiver to fulfill the electrical specifications of EIA Standard 232–E and CCITT V .28. The drivers feature true TTL input compatibility, slew rate limiting outputs, 300 Ω power–off source impedance, and output typically switching to within 25% of the supply rails. The receivers can handle up to ± 25 V while presenting 3 to 7 kΩ impedance. Hysteresis in the receivers aid in the reception of noisy signals. By combining both drivers and receivers in a single CMOS chip, these devices provide efficient, low–power solutions for both EIA–232–E and V .28 applications. These devices offer the following performance features: • Operating Temperature Range TA = –40° to +85°C Drivers • ± 5 to ± 12 V Supply Range • 300 Ω Power–Off Source Impedance • Output Current Limiting • TTL and CMOS Compatible Inputs • Driver Slew Rate Range Limited to 30 V/µs Maximum Receivers • ± 25 V Input Range • 3 to 7 kΩ Input Impedance • 0.8 V of Hysteresis for Enhanced Noise Immunity • TTL and CMOS Compatible Outputs Available Driver/Receiver Combinations Device ML145403 ML145404 ML145405 ML145408 Drivers 3 4 5 5 Receivers 5 4 3 5 Figure 1 2 3 4 No. of Pins 20 20 20 24 Note: Lansdale lead free (Pb) product, as it becomes available, will be identified by a part.


2008-03-12 : 2732Q-3    ETC2735    ETC2745    ETC2755    ETC2732Q    ETC2735Q    ETC2745Q    ETC2755Q    M9-CSP64    2SB1018A   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)