2.5mm Pitch Board to Board Vertical Post Header
MDF14A Series
sFeatures
1. Service Efficiency Up contact and contact.
T...
2.5mm Pitch Board to Board Vertical Post Header
MDF14A Series
sFeatures
1. Service Efficiency Up contact and contact.
The post header is developed in the special design capable of vertically connecting the board unnecessary for insertion or extraction. The post header can be connected in combination of the receptacle with the plug at low cost.
2. Current Capacity [5A]
By adopting the 0.8mm round pin as the post pin, the pin strength can be enhanced as well as the current capacity can be maintained at 5A approximately.
3. Board Pre-fixed Mechanism
The kink process is provided for the board pre-fix process.
4. Pin Extraction Specification
The post header corresponds to individual pin extraction specifications.
Kink process
sApplications
Various power supply units, and secondary power unit for the set
B136
sProduct Specifications
Rating Current rating : 5A Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Storage Moisture Range: 40 to 70% (Note 2)
Voltage rating : 250V AC Operating Moisture Range: 40 to 80%
Item 1. Insulation Resistance 2. Withstanding
voltage 3. Vibration 1000M ohms min.
Specification 500V DC 1500V AC/1 minute No flashover or insulation breakdown. No damage, cracks, or parts looseness.
Condition
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-55ç: 30 minutes¡5 to 35ç: 10 minutes max.¡ (-85ç: 30 minutes...